Last Updated： Aggregation Period:Jul 09, 2025～Aug 05, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 37 items
Easily attachable to the production line with a clamp-on type, ideal for online cleaning of piping.
This product is a device that is attached to piping with a clamp, vibrates the entire pipe wall, emits ultrasonic waves from the inner surface of the pipe, and cleans by allowing the cleaning solution to pass through the pipe. It can be easily installed on production lines.
Built-in vacuum pump
Small vacuum ultrasonic cleaning device handled by Sakura Seiki Co.
Three different frequency selections are available! An ultrasonic cleaner that can perform cleaning with various ultrasonic effects.
The "US-WS Series" is a tabletop multi-frequency ultrasonic cleaning machine capable of a wide range of cleaning, from rough and strong cleaning to fine and gentle cleaning. The ultrasonic oscillation employs a bolt-tightened Langevin-type transducer with high cleaning power. The wetted parts are made of stainless steel, which has excellent corrosion resistance, and it is possible to switch between different frequencies for cleaning or select a single frequency for cleaning. With microcomputer control, the set time, temperature, and selected frequency are remembered during cleaning. 【Features】 ■ Capable of a wide range of cleaning ■ Ultrasonic oscillation uses a bolt-tightened Langevin-type transducer with high cleaning power ■ Wetted parts are made of stainless steel with excellent corrosion resistance ■ Capable of switching between different frequencies for cleaning or selecting a single frequency for cleaning ■ With microcomputer control, the set time, temperature, and selected frequency are remembered during cleaning *For more details, please refer to the PDF document or feel free to contact us.
Hands-free operation is possible with audio guidance and a photoelectric switch! A tabletop model with high output of 600W and 1200W.
■Tabletop model with high output (600W/1200W) ■Cleaning compatible with large equipment and machine parts has become possible. ■Adoption of photoelectric sensors and voice guidance in the control section. ■Operations can be confirmed via voice guidance without touching the switch with wet or dirty hands. ■Automatic tracking with oscillation frequency and set output. ■Stable cleaning power is achieved. Additionally, there is an alarm display for oscillation abnormalities. ■In addition to the drainage cock, an overflow drain installation hole has been provided. ■Expansion to a circulation system has become easier.
Achieve both uniform cleaning and damage reduction! From soft cleaning to hard cleaning, you can obtain optimal cleaning power tailored to your needs.
■ Our unique "DynaShock Modulation (DM) method," made possible by full digital technology, allows for optimal cleaning power tailored to applications, ranging from soft to hard cleaning. * The DM (DYNASHOCK MODULATION) method is an oscillation method that controls the ultrasonic power ratio (modulation degree) generated simultaneously at two frequencies from the same transducer while maintaining a constant total output power, achieving optimal cleaning power from soft to hard cleaning. ■ By selecting the DM modulation degree, uniform ultrasonic waves with high sound pressure can be generated throughout the tank, enabling consistent cleaning without unevenness. ■ Various functions have been realized through digital control. - Achieving optimal cleaning: Stable cleaning is possible through optimal frequency control and ultrasonic output control. - Improved maintainability: No adjustment of the oscillator is required when replacing the transducer unit. - Wide power input range: Supports power input of AC200V to AC240V ±10%. - Monitoring function: Management of output power is possible via the front panel display. - Abnormal diagnosis function: An error message indicating the cause of the abnormality is displayed when an issue occurs. - Sweep function: Enables even more uniform ultrasonic cleaning.
Efficient complete cleaning! A special ultrasonic cleaning machine that performs cleaning using ultrasonic energy.
The "Element Ultrasonic Cleaning Device" is a specialized ultrasonic cleaning machine that cleans sintered metal filter elements using ultrasonic energy. The elements are placed in a dedicated cleaning rack and immersed in the cleaning tank, where the ultrasonic transducer moves sequentially over the elements, performing efficient and thorough cleaning. This specification is for filter elements with outer dimensions of 14φ×1020L mm, and the device can clean a total of 50 elements, with 10 elements per rack, in approximately one hour. 【Features】 ■ Cleaning is performed using ultrasonic energy ■ Efficient and thorough cleaning *For more details, please refer to the PDF document or feel free to contact us.
Cleaning of soft glass materials with a wear level of 400 or higher from general glass materials! An ultrasonic cleaning device capable of a wide range of cleaning is available. *Samples of the "acetone alternative" cleaning agent are currently being offered!
The "11WUC-S015" is an 11-tank ultrasonic cleaning device compatible with various optical glass lenses. Powerful ultrasonic waves spread uniformly throughout the cleaning tank with spherical wave vibrations, preventing cleaning inconsistencies. It can clean high-wear soft glass materials and blue glass with gentle vibrations that are lens-friendly. It is equipped with two drying systems: clean warm air drying after drawing up pure water and paper drying using various solvents, allowing for drying tailored to different glass materials. 【Features】 ■ Compatible with various optical glass lenses ■ Can also clean lenses with black paint, such as GT-7 ■ High-performance ultrasonic generator ■ Multi-drying system ★ A cleaning agent "IC-09" that can replace acetone is also available for sale ★ * Free samples are currently being offered. * For more details, please refer to the PDF materials or feel free to contact us.
Achieving reduced cleaning unevenness and energy savings with FM+AM oscillation method.
FM modulation... continuously varying the frequency of ultrasound. AM modulation... continuously varying the high-frequency output of ultrasound. AM modulation is resistant to fluctuations in load (work, liquid type, liquid depth), while FM modulation can equalize the ultrasound in the tank, allowing for high-efficiency and uniform cleaning. ■ Adopts FM (frequency modulation) + AM (output modulation). It is a high-efficiency, energy-saving type that reduces cleaning unevenness. ■ The size and weight of the oscillator have been compacted to one-third of conventional models (compared to our company). ■ When replacing with the same specification transducer unit, no adjustment of the oscillator is required, making maintenance easy. ■ A wide range of power control is possible according to the cleaning and processing purposes.
Recommended electrolytic ultrasonic cleaner for mold cleaning! The degassing type improves cleaning performance! Agents wanted!
The "ELIOS series" is an electrolytic ultrasonic cleaning machine suitable for mold cleaning. The degassing type has stronger ultrasonic power than conventional machines, improving cleaning performance. Options include a shaking mechanism, four-sided electrodes, and an overflow tank. 【Lineup】 ■ELIOS-4030 ■ELIOS-6040 ■ELIOS-8050 *For more details, please refer to the PDF materials or feel free to contact us.
A lineup of output from 320W to 1600W! We will select the optimal ultrasonic cleaner according to the items to be cleaned!
For anything related to ultrasonic cleaners, please leave it to Nisshin Kiko Co., Ltd!!!
Simple design! Compatible with neutral cleaning solutions, weak alkaline cleaning solutions, and strong alkaline cleaning solutions.
The "Tool Washer HST600" is an ultrasonic cleaning machine that can be used for various applications. Despite its compact size, it features a larger design for the tank dimensions. It is compatible with cleaning solutions ranging from neutral cleaners to weak and strong alkaline cleaners. It can perform cleaning tailored to customer needs, from degreasing resin products to cleaning metal processing parts. 【Features】 ■ Usable for various applications ■ Simple design for easy operation ■ Large capacity despite its small size ■ Equipped with a standard sweep function ■ Prevents uneven cleaning by modulating the frequency *For more details, please refer to the PDF document or feel free to contact us.
Equipped with four oscillation modes, achieving powerful cleaning with reduced unevenness.
■ Four cleaning modes can be selected according to the purpose. By choosing the appropriate cleaning mode, stable cleaning performance is achieved. ・STANDARD: Provides a cleaning process with minimal unevenness. It balances the features of both POWERFUL and MULTI modes. ・POWERFUL: Suitable for removing stubborn dirt by concentrating ultrasonic waves. ・MULTI: Ideal for precise cleaning that effectively removes dirt from hidden areas. ・BURST: Allows for energy-saving cleaning by intermittently emitting ultrasonic waves. ■ A simple design that combines functionality The clean form without protrusions from the drain valve and power cord eliminates wasted space for installation. The switch and power cord are located on the back, making it less likely to get wet. ■ Easy mode switching with button operation Timer, output, and temperature adjustments can be easily set with simple button operations.
